Semiconductor/wafer Cleaning Agent
ZSEM produces a variety of high-purity fluorine-containing electronic special gases and organic solvents to make your chip manufacturing easier.Beacause wafer cleaning task is one of the most repeatedly carried out procedure that is undertaken when fabricating wafers. With the ever-changing technology and device shrinking property, cleaning processes do get complicated each time. Wafer contaminants range from particles with a diameter range of 0.1 to 20 microns, organic and inorganic contaminants, and impurities. Wafer cleaning has to be done without introducing any additional impurities or contaminants to the final surface.
Semiconductor Cleaning Agent,Wafer Cleaning Agent,Carbonyl Fluoride Semiconductor Materials,Chemical Special Gas Shandong Zhongshan Photoelectric Materials Co., Ltd , https://www.cnzsem.com
A grille swap is one of the simplest and most effective ways to refresh the look of your Toyota Tundra. Whether your current grille is damaged or you're just looking for a more aggressive style, upgrading to the TRD Pro grille can give your truck a sportier and more rugged appearance. The TRD Pro grille consists of two parts: the lower main grille and the upper hood bulge trim, both designed to match your vehicle's original factory finish.
*Image Credit: TundraTalk*
Before ordering, it’s important to verify your vehicle’s paint code to ensure the new grille matches your Tundra perfectly. You can find this code on a sticker located on the driver’s side door jamb. Look for a barcode with "C/TR" followed by three digits—this is your specific paint code.
The TRD Pro grille offers several benefits:
- **Direct fit** replacement
- No extra hardware required
- **Toyota lettering pre-installed**
- **Pre-painted** to match your truck
### Parts You’ll Need
#### Upper Hood Bulge Trim (Part Number: 76180-0C010)
- Matte Black
- Super White
- Magnetic Gray
- Classic Black
- Cement
- Barcelona Red
- Inferno
- Quicksand
#### Lower Main Grille (Part Number: 53100-0C260)
- Super White
- Magnetic Gray
- Classic Black
- Cement
- Barcelona Red
- Inferno
- Quicksand
### Tools Required
- Ratchet and extension
- 10mm socket
- Flat blade screwdriver
### Step-by-Step Installation
#### Replacing the Upper Hood Bulge Trim
1. Release the hood latch from inside the cab.
2. Lift the safety catch lever to open the hood.
3. Locate and remove the three 10mm bolts behind the trim.
4. Gently lower the hood and pull out the old trim.
5. Align the new piece and push it in until the pins click.
6. Reinstall the bolts and close the hood.
#### Replacing the Lower Main Grille
1. Remove the four 10mm bolts at the top of the grille.
2. Use a flat blade screwdriver to release the black push clips.
3. Lift the grille and locate the release tabs below the headlights.
4. Push down and gently pull the grille out.
5. Install the new grille, aligning the locking tabs and releasing the pins.
6. Reattach the push clips and bolts.
Once completed, your Tundra will have a fresh, updated look that stands out on the road. If you're interested in other upgrades or fun facts about your Tundra, check out our related blog posts. Enjoy your new TRD Pro grille!