In the past, the self-drive car rental in Shenzhen was mainly for some enterprises and institutions. The proportion of individual car rental was not very large, but with the improvement and development of the car rental industry, the types of customers are also increasing. However, although it is more convenient to rent a car, for some novices, you should not forget the precautions when enjoying convenience. In particular, be careful not to drive for a long time. For some institutions, the purpose of renting a car is mainly to meet the needs of public affairs, but in terms of individual car rental, more is to meet the needs of outbound play. However, people who have had travel experience know that although travel is a good opportunity to enjoy different scenery, it is also a very consuming task. Especially in the case of driving, people are more likely to become tired. For those novices, the driving skills are not good enough. After a long time, the physical strength will drop in a straight line. This will make it easier for you to be blind when you drive. Moreover, novices do not have a thorough understanding of the performance of the car, and after the car has been running for a long time, it is prone to minor glitches. It is difficult to solve it without experience. Therefore, if you are a novice traveler, it is best to call on a more experienced driver, so that after fatigue you can also exchange cars, and things that are easier to deal with. Apart from the fact that it may cause some accidents because of the long time, the road conditions encountered on the way by car may also be a risk factor. Since it is a play, there is no guarantee that the place where it passes is a flat road, and the novice's technology is limited. It is difficult to control the roads with some bumps or even nine ileals. If you do not follow an experienced person, the situation is still relatively Worrying. Moreover, by allowing the old driver to drive, the novice can also watch the study on the side, thereby increasing the experience. Therefore, if you are a novice traveling in Shenzhen by self-driving car, it is best to find a friend with a higher driving skill or experienced experience. This will not make the journey seem lonely, but also to ensure maximum safety.
The internal structural design is vane, vane damper is more suitable for soft close. ABD vane dampers are used to dampen drives, control speed, and many other applications. The damping direction of the vane dampers with continuous rotation can be clockwise, counter clockwise, or in both directions. Vane dampers are widely used in automobile interior decoration, household electric appliances, furniture and bathroom products, etc. Our dampers can make the movement of structures soft, quiet and safe to mitigate the impact, avoid the damage, increase the mechanical life, reduce noise, and improve product quality.
NOTE:
1. Please contact the corresponding product engineer for specific torque products.
2.The Standard of completion closing:the angle is 90° between Shaft A and Shaft B.
3.It is closing position to assemble the shaft into the housing.
4. Max. cycle rate: 3 cycles/min(Clockwise110 °, 110 ° anti-clockwise for 1 cycle)
5.Operating temperature:0~40℃
6.Storage temperature:-10~60℃
Soft closing time test: Measure the closing time from angle 70 to 0.
Rated Torque (T).
Test Temperature: 23±2℃.
Durability test:
Test Method: From the closing position to opening position, push back to 70°, soft close from 70° to 0°.
Rated Torque (T).
Operation Angle: 0°~110°.
Test Temperature: 23±2℃.
Durability test cycle: 50,000 cycles. The result of product test )>2s.
Vane Damper,High Temperature Dampers,Toilet Seat Vane Damper,Soft Down Damper,Storage Boxes Vane Damper Shenzhen ABD Equipment Co., Ltd. , https://www.abddamper.com
When the axis of rotation is moving, the blades that are connected to the axis of rotation rotate at the same time. The silicone oil in the oil chamber is squeezed between the blade andthe body to the back of the blade. The resistance formed by the pressure of the silicone oil to the area of the blade is the damping torque of the rotating shaft and the blade. The torque generated during rotation is determined by the oil viscosity, the pressure area of the blade and the clearance between the blade and the body.
