Sander Sander has the same utility with Grinder , or Polisher. Sander is installed at the end of Industrial Robot, but sander is hard to control the force onto workpiece, it needs our Force Control System, Constant Force Actuator, or active contact flange to control the force flexibly. Only the sander is not enough to finish the grinding polishing process in a high efficiency and get a better surface effect. So force control system is essential and necessary part for the whole sanding system. industrial Electric sander, industrial pneumatic sander, industrial disc sanders DARU Technology (Suzhou) Co., Ltd. , https://www.yiwufizz.com
1. Clean the sprinkler regularly and keep the sprinkler clean and clean to prevent corrosion or rust. When cleaning, it is best to use high-pressure water or hot water, so that the solid waste on the body is easier to wash off, if the cleaning is not clean, it is easy to cause rust, when cleaning the drain hole in the sprinkler The stagnant water is cleared. Especially in winter, it is necessary to thoroughly clean the sprinkler.
2. If the vehicle body is damaged or paint is removed, it should be repaired immediately to prevent rust or larger paint loss. When rust occurs in some important parts, you should go to the repair shop to repair it.
3. Keep the inside of the car dry and ventilated, and avoid stopping the car in a humid place, otherwise the sprinkler will be wet and rust will appear.
In the course of use, sprinklers often come in contact with water. A long time will inevitably lead to the occurrence of rust, reduce the service life of the car, and sometimes cause the occurrence of failures. Therefore, in use, it is necessary to sprinkle the water truck. Do some rust-proof measures.