The technology is equipped with the power to lead the new generation of SUVs. The Song once again demonstrates BYD's trend-setting technological innovation charm. It is mainly equipped with a two-color body, equipped with CarPad multimedia system, panoramic sunroof, soft interior, full-time electric four-wheel drive, mobile power station. And other high-end configurations, tailored for the fashionistas.
In terms of appearance, BYD is more prominent in design, and it is particularly eye-catching in the electric vehicles of the Qin, Tang and Song series. Song's style is sharp and flamboyant, and the recognition is very high. It adopts the X-shaped design style and adds chrome decoration to meet the taste of the Chinese people. In terms of size, BYD Song is positioned as a compact SUV with body sizes of 4565mm, 1830mm, 1720mm and a wheelbase of 2660mm. Song has a near-high beam integrated automatic xenon lamp, LED running lights, panoramic images, keyless entry, etc., with rich configuration and strong sense of technology.
Power is BYD Song's biggest selling point, which is the key model of BYD's 542 strategy. Its dual-mode version will be equipped with the full-time electric four-wheel drive technology of the leading industry, with the advantages of “three-engine power, high efficiency and energy saving, fast response”. . The whole vehicle is a combination of a four-wheel motor and a 1.5T/2.0T gasoline engine. The gearbox is matched with a 6MT or 6-speed automatic transmission. The 1.5T engine has a maximum power of 113 kW and a maximum torque of 240 Nm. The 2.0T engine has a maximum power of 151 kW and a maximum torque of 320 Nm.
Sanqing Power is Energy Efficient BYD Song offers both fuel and dual mode power systems. Song's fuel models are equipped with 2.0TI and 1.5TI power units. 2.0TI is equivalent to the power performance of the traditional 3.5-liter naturally aspirated engine, which can satisfy the driver's desire for speed and passion. The 1.5TI model can enjoy the national purchase tax halving policy.
As a key model in the BYD 542 strategy after Tang, Song's dual-mode version is equipped with full-time electric four-wheel drive technology, which not only can hold mountain roads, snow, sand, mud and other all-terrain road conditions. With the advantages of “three-engine power, high efficiency and energy saving, and quick response”, it accelerates 4.9 seconds per 100 kilometers. In the current industry accelerated row behavior, there are only 40 models that can run into 5 seconds, and most of them sell for more than one million yuan.
If Song's CarPad multimedia system provides car owners with more personalized customized services to make travel more interesting, then Song's other magic weapon - mobile power station, can be compared to a super large "charge treasure" ", making life easier." This is BYD's unique technology, which can realize the 220V AC discharge function (VTOL) outside the vehicle. That is, the vehicle can be converted into an ordinary two/three-hole plug-in through the self-contained switching device to discharge the external electrical appliances.

Product introduction
Steel Bending Machine, one of steel reinforcement processing machinery.
The working mechanism is a horizontal working disk rotating on the vertical axis. The steel bar is placed in the dotted line position in the diagram. The supporting shaft is fixed on the machine tool.

For bending steel bars of various diameters, there are several holes on the work plate to insert the bending pin shaft, and the center pin shaft of different diameters can be replaced accordingly.

Advantages of characteristics
Applicable to all kinds of round steel, carbon steel, screw steel.
It has strong operability, high working efficiency, convenient Angle adjustment and neat bending
Operation procedures of steel bending machine:

1. Check whether the mechanical performance is good, keep the working table and bending machine surface level;
And prepare various spindle tool blocks.

2. According to the requirements of the diameter of steel bar and bending machine, the core shaft, forming shaft, iron shaft or variable structure shall be installed. The core shaft diameter shall be 2.5 times of the diameter of steel bar.

Check the core shaft, block and turntable shall be free of damage and crack, and the protective cover shall be tightly fixed and reliable, and the operation shall not be performed until it is confirmed that the air machine is running normally.

Iv. During the operation, insert the bend end of the steel bar into the clearance provided by the turntable for fixation, and fix the other end close to the fuselage and press it with your hand to check the fuselage fixation.

The side that actually holds the steel bar can be moved.

It is strictly forbidden to change the spindle, change the Angle, adjust the speed and so on.

When bending steel reinforcement, it is strictly forbidden to process steel reinforcement diameter, root number and mechanical speed beyond the mechanical specification.

When bending high hardness or low alloy steel bars, the maximum limit diameter shall be changed according to the mechanical nameplate, and the corresponding mandrel shall be replaced.

8. It is strictly forbidden to stand in the working radius of the bending steel bar and the unfixed side of the fuselage.
Curved semi - finished products should be stacked neatly, curved hooks should not face up.

When the turntable is turned, it must be done after it has stopped.

X. completion of operation, cleaning of site, maintenance of machinery, power off lock box.

Stirrup Bender

Stirrup Bender,Stirrup Bending Machine,Automatic Stirrup Bender,Rebar Stirrup Bending Machine

Shandong Luteng Building Equipment Co., Ltd. , https://www.lutengmachinery.com