Ceramic Ring For Laser Cutting Machine
Ceramic Ring Replacement needs to spin off the nozzle first, followed by the Ceramic Ring Lock Master Spin, note that in the process of rotating fingers to resist the old ceramic ring to prevent vertical sliding down. In the replacement of ceramic ring, need to cut the bottom of the copper pillar to the induction hole, normal alignment of good ceramic ring is horizontal, will be a bit elastic, around can not rotate. Then the finger is pressed against the ceramic ring and the locking block, and finally the nozzle is screwed on to complete the installation. At the same time, after the installation is completed, it is necessary to debug the beam path to prevent the deviation of the light.The advantage of Zirconia ceramic ring is its extremely small Coefficient of thermal expansion (high temperature resistance) , high density (wear resistance) , high resistivity. Such a ceramic body can effectively ensure the insulation of important parts and cutting head, and further reduce the loss of cutting head.
Ceramic Body,Corrosion resistance,High temperature resistance,High resistivity Wuxi huaoulai automation equipment Co., Ltd , https://www.china-hol.com
                           Specifications
Techincal parameters
ModelAC220V 50Hz
Power Rating
750W
Pressure Rating(Mpa)
70
Pressure Rating(Mpa)
Low High: 7 70
Rated Output(L/min)
low High: 5 0.9
Oil Capacity(L)
7
Size(mm)
350×270×510
Weight(kg)
26
Remarks
Single activeÂ
                         Functions
1.High and low speed two stage design is for quick oil output. Turbine oil absorption could ensure reaching Max.effective oil volume.
2.Over pressu re safety valve unit could avoid over pressure damage.At 700kg/cm2,automatically release.
3.Oil pipe fitted with quick coupling could be ordered for any length.
 Packaging details: by usual packagingÂ
Â
Shipping delivery: 7Â days after payment.
                                  Our Services
1.Your inquiry will be replied within 24 hours.
Â
2.For our Cutter , we have 12 months  warranty
Â
3.Within12 months, if there is some accessory going wrong, we will send you the accessory at once,  free of charge or deliver the spare parts in next order
Â
4.If the buyer has any questions from our technical department, we can supply on-line service.Â
                                                           Our CompanyÂ
    We have first-rate engineers, timely introduce of international advanced production equipment, strive for excellence and keep pace with the times.
         Owned more than 110 dealar in domestic, We are a member of the Chamber of Construction Machinery & China Fire Protection Association.  ODE brand will be better and better.
Â
Telephone:13588299917
Hydraulic-hole Digge