brief introduction Cyclone Dust Collector Cyclone Dust Collector,Industrial Cyclone Dust Collector,Woodworking Cyclone Dust Collector,Dust Collection Cyclone Dust Collector Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com
Â
HK TOPMOST CO.,LTD
Process
Investment casting
Material
Carbon Steel, Stainless Steel and Alloy Steel, etc.
Material Grade
GB, ASTM, AISI, DIN, BS, JIS, NF
Weight
2g-80kg
Production Capacity
More than 1,000 tons per month.
Surface treatment
Polishing, Sand Blast & passivation, Plating, etc.
Surface Roughness
Up to Ra1.6μm-Ra6.3μm
Accuracy
Class CT4-CT6
Applied Software
Proe, Igs, Stp, Catia, Dwg, Pdf, Jpg, Png, etc.
Heat Treatment
Anneal, Quenching, Normalizing, Carburizing, etc.
Machining Equipment
CNC Center, CNC Machines, Turning Machine, Drilling Machines, Milling Machines, Grinding Machine, etc.
Test Equipment
Spectrum Analyzer, Hardness Tester, Three Dimensional Inspection Equipment, etc.
QC System
100% Inspection Before Shipment
Lead Time
Depends on Order Quantity. Normally 15-40 days.
Standard
ASTM, AISI, GB, etc.
Certificate
ISO9001:2008; SGS, etc.
Payment Terms
T/T, L/C, D/P, D/A, etc.
Shipment Terms
FOB, CFR, CIF, EXP, DDP, DDU, FCA,etc.
Application
Aerospace; Architectural Hardware; Automotive & Vehicles; Bearing & Seals; Candy and food Machines; Chemical Processing; Construction Machinery; Electronic Equip and Motor; Firearms and weapons; Hand Tool; Lock & security systems; Marine Hardware; Medical Equip; Millitary Equip, Pager Processing; Pneumatic Tool; Power Transmission; Pump, Impeller and Propeller; Texitile Sew Machinery, Valve and Pipe Fittings.
Why choose us
The cyclone was used in 1885 and has developed into many forms. According to the way of air entry, it can be divided into two categories: tangential entry and axial entry. Under the same pressure loss, the latter can handle about 3 times the gas and the air distribution is even.
The Cyclone Dust Collector is composed of an intake pipe, an exhaust pipe, a cylinder body, a cone and a ash hopper. The cyclone Dust Collector is simple in structure, easy to manufacture, install and maintain management. The investment and operation cost of the equipment are low. It has been widely used to separate solid and liquid particles from the air or separate solid particles from the liquid. Under normal operating conditions, the centrifugal force acting on particles is 5~2500 times that of gravity, so the efficiency of cyclone separator is significantly higher than that of gravity settling chamber. Based on this principle, a cyclone dust removal device with a dust removal efficiency of more than ninety percent has been successfully developed. In the mechanical dust remover, the cyclone dust collector is the most efficient one. It is suitable for the removal of non - adhesive and non - fibrous dust. Most of them are used to remove particles above 5 m. The parallel multi tube cyclone device also has 80 to 85% dust removal efficiency for 3 - M particles. The cyclone duster constructed with special metal or ceramic materials with high temperature resistance, abrasion resistance and corrosion can operate at a temperature of 1000 degrees C and pressure of 500 x 105Pa. In terms of technology and economy, the control range of pressure loss for cyclone dust collector is generally 500 to 2000Pa. Therefore, it belongs to the medium effect dust collector, and can be used for the purification of high temperature flue gas. It is a kind of widely used dust remover, and it should be used in the dust removal of boiler flue gas, multistage dust removal and predusting. Its main drawback is the low removal efficiency of fine particles (<5, m).